Conductivity Electrodes
PARKER HANNIFIN CORP SCICON CND SENSR 3/8 BARB 5PK
3/8" Barb for tube size range ID 0.31" to 0.38".,8 LPM, 60 PSI. SciLog� SciCon� pre-calibrated single-use conductivity sensors are available in 5 sizes, pre-programmed and barcoded with a unique ID for full traceability and easy data collection. Calibration and identity data are stored on the sensor's chip.
Cole-Parmer Conductivity/Temp probe, K=0.1 for 6 and 6 series meters
Oakton Conductivity/Temp Probe, for 6 and 6+ Series Meters; K=0.1, If your conductivity measurements are off, you might need a new cell, sensor, or calibration kit. Update, upgrade, or replace to get the best out of your Oakton conductivity, resistivity, or TDS meter.
Hach Company Intellical™ CDC401 Laboratory 4-Poles Graphite Conductivity Cell, 3 m Cable
Intellical™ CDC401 is a digital, graphite, 4-pole conductivity cell with a temperature sensor. The standard version is available with a 3 or 1 m cable and is intended for laboratory use. The CDC401 is ideal for measuring electrical conductivity, salinity, resistivity, or total dissolved solids (TDS) in wastewater, drinking water, or general water quality applications.
Hach Company Radiometer Analytical CDC866T Conductivity Cell with Temperature Sensor (4-pole Pt sensor, k = 1.0 cm-1, epoxy body)
The Radiometer CDC866T Conductivity Cell is a 4-pole conductivity cell with platinized, platinum sensor (k = 1.0 cm-1), robust epoxy body and integrated temperature sensor. The CDC866T sensor's platinized, 4-pole platinum ring design ensures results in saline (high conductivity) or general aqueous and non-aqueous media over several decades of conductivity with a single cell, using just one calibration. The epoxy body of the probe can be easily removed for rinsing, which makes the cell ideal for measurements in harsh conditions. The CDC866T has a fixed cable with MAB6 plug for use with Radiometer Analytical CDM210/230/92 conductivity meters. Please reference article no. E61M020 for the CDC836T (3-pole), compatible for use with Hach sensION+ benchtop conductivity meters.
Hach Company Radiometer Analytical CDC566T Conductivity Cell with Temperature Sensor (4-pole Pt sensor, k = 1.0 cm-1, epoxy body)
The Radiometer CDC566T Conductivity Cell is a 4-pole conductivity cell with non-platinized, platinum sensor (k = 1.0 cm-1), robust epoxy body and integrated temperature sensor. The CDC566T sensor's 4-pole platinum ring design ensures results in general aqueous and non-aqueous media over several decades of conductivity with a single cell, using just one calibration. The epoxy body of the probe can be easily removed for rinsing, which makes the cell ideal for measurements in harsh conditions. The CDC566T has a fixed cable with MAB6 plug for use with Radiometer Analytical CDM210/230/92 conductivity meters. Please reference article no. E61M021 for the CDC536T (3-pole), compatible for use with Hach sensION+ benchtop conductivity meters.
Cole-Parmer WTW TetraCon 925-3 IDS Conductivity Probe, 2000 mS; 3 m Cable
The range of this conductivity probe is 10 S to 2000 mS at 0.5 % of value.
Hach Company Contacting Conductivity Sensor, Mid-Range Conductivity, K=1.0, 3/4" Kynar Compression Fitting
Nominal Cell Constant (K) = 1.0, 3/4 inch NPT Kynar (PVDF) Compression Fitting, 6m (20ft) Analog Cable, Titanium Electrode
Sigma Aldrich Fine Chemicals Biosciences Amidase from Pseudomonas aeruginosa recombinant, expressed in E. coli, buffered aqueous glycerol solution, hydroxamate transferase >=200 units/mg protein (biuret) | 9012-56-0 | MFCD00166319 | 250UN
Amidase from Pseudomonas aeruginosa recombinant, expressed in E. coli, buffered aqueous glycerol solution, hydroxamate transferase >=200 units/mg protein (biuret) | 9012-56-0 | MFCD00166319 | 250UN
Cole-Parmer Conductivity Cell; K=0.01, SS, In-Line; 100 Ohm Pt RTD ATC
These 10-foot cables with stripped ends are economical replacements for a variety of controllers. There are flow-through, in-line, swage, and dip styles available.
